In this guide, we are going to see How to fix a Wobbly Ceiling Fan. Generally, the ceiling fan circulates air all over the room and helps in maintaining the temperature to comfort zone. The lengthier the fan blades are then it circulates more air and the room gets much cooler. If the ceiling fan vibrates then it might be due to one of two motives. Either it is not fixed properly to the ceiling or the blades are not balanced correctly.
Setting the wobbly ceiling fan is just like a minor mending project that could become a peril. While a little wiggles in a ceiling fan that is 1/8 of an inch is normal, but anything more than this could be a bigger problem. Using a fan that is out of balance may result in clumsy operation and shows much impact on fan motor-power. Ultimately the fan would pose for safety risk and there might be some chance for few parts to get detach and fall down or the complete fan drops off. So the execution of some simple maintenance and little verifications can help you in preventing the bigger headache in the future.
Why does my Ceiling Fan Wobble?
Ceiling fan generally wobbles because of these two reasons. But need not to worry as the problems are minor and can be fixed. One reason why does my ceiling fan wobble is a fan is not properly attached to the ceiling electrical box and the other reason is maybe the blades are unbalanced.
How to fix a Wobbly Ceiling Fan?
A detailed description of these issues is explained below. Check and know How to fix a Wobbly Ceiling Fan.
1. The fan is loose at the electrical box that is the ceiling fan may be loose because the screws connecting the ceiling fan to the electrical box is loose. Ceiling fan rocks back and forth, if the screws are loose.
Fix the problem:
- Turn the fan off
- Step on to the ladder placed near the fan while some other on a separate step ladder to hold the fan
- Try to remove the screws from the canopy carefully.
- Tighten all the screws at the electrical box. These screws help to keep the fan attached to the box and tightening them will stop the wobbling
- Back on the screws to the canopy
- Then turn the power on and check for the wobbling.
2. The blades are unbalanced. Over a period of time, the ceiling fan will wobble because the blades of the fan become unbalanced. This means that when the fan spins much weight on one blade will throw off the fan’s center of gravity.
Fix the problem:
- Clean the dust from the blades. The weight of dust will throw off the fan’s balance.
- Snip a clothespin on side of the blade about the half that is from the blade’s end to the fan’s center.
- Turn on the fan to a low setting. If the fan still wobbles then try different blade until the wobbling stops.
- Once you have found the place on the blade where the wobbling stops, then stick some coins to the top unbalanced blade till the wobbling stops. Or otherwise, get the fan balancing kit which provides you with weights and clip.
How to balance a wobbly ceiling fan?
A wobbly ceiling fan can appear to be louder than a jackhammer and it will be like more annoying. Resolving this problem is not that difficult but it needs some forbearing to find out what the issue is as there could be many causes for a problem. Below some methods will help for how to balance a wobbly ceiling fan.
1. Cleaning the ceiling fan
After a long period of time dust may settle on a ceiling fan that can block the fan’s motor and in turn, it keeps much force on the fan blades. Any of these problems can make the ceiling fan wobble so regular cleaning can help to remove it.
- Switch off the power button of fan and wait until it stops completely.
- Place the stepladder beneath the fan little away from midpoint and scramble up slowly and carefully to the primary blade.
- With the help of a duster clear all the dirt present on the apex and underneath the surface of the fan blades.
- Dump a soft cloth in warm water and clean the fan cover and sponge all the surfaces of the blade.
- Use some cotton swab to clean the crevices of ceiling fan arms
- Then dry thoroughly all the surfaces with another microfiber cloth.
- Finally, turn the fan on initially at medium speed and then make the fan to rotate at high speed to verify whether the issue is resolved or not.
2. Check the structure of ceiling fan
The very initial thing to test out the whole support of a ceiling fan. For the fan to be stable it has to be installed on a correct ceiling mount: that is 2×4 grins along with lag screws. You can normally undo the bracket frame and can have a look at underneath of the fan in what way it is connected. You can examine the sticker present on the fan’s electrical package and stare at the skulls of hex bolts which are attached to the wood or metal brace. Kink the brace and tauten if it shakes. Next, see for loose clips in other portions of the fan.
- Assess the coat-hanger ball and ensure that it is placed firmly in its furrow.
- Taut the down pole bearing screws.
- Exchange the awning cover and then tauten the bolts.
- Plaid with the button covers to ensure that it is tightly and steadily attached to the light equipment.
- Switch on the fan and inspect if the tremble has steadied or not.
3. Examine Ceiling Fan Blades
After a long duration of time, the fan blades start to slightly fall off, mainly if it present in the places with high dampness or some alterations in temperature. This is the main reason for the fan’s unsteadiness and results in producing sound.
- With the tape check the perpendicular space between the ceilings and to the civic amenity point of the fan blade.
- If whole dimensions are not similar then regulate the blades by rotating the mounting screws tightly so that they hold properly to the motor housing.
- If all the screws are tight then you just require adjusting the blade arms or irons (the metal holders attached at end of blades).
- Inspect each blade of the fan to make sure that they are not warped.
- If any blade is damaged then replace them. For more convenience replace or upgrade fan arms at the time when you replace blades.
While choosing the new fan blades, make sure that you have matched with your fan type and the fan model number such that they are in the same length, weight and width with your older blades. Blades with heavyweight will have more pressure on fan’s motor and fans may tire out hastily. Blades with too lightweight or too short in size will not move the air efficiently.
Most of the ceiling fan has replacement parts list available in PDF form that will direct you with proper replacement blades.
4. Fan Balancing Kit
A ceiling fan balancing kit is generally packed with a new ceiling fan, and they can also be bought separately. Balancing kit comes with a plastic clip and nearly five small weights, with adhesive backing to make them easily attached to fan blades.
- Attach the plastic clip to one blade about half of its length, and turn on the fan to check whether the instability has improved or not.
- Then turn off the fan.
- Recurrence the same way to every blade until you sort out the issue
- If you find some problem with the blade then for an inch near to the end of a blade glide the clip and check for progress after every adjustment.
- Once you find the place where there is more stability then set the steadiness weights in the fan blades mid-point and corresponding to clip.
- Glue the weight in a position and then remove the clip.
5. Replace the ceiling fan
If your ceiling fan is 10 years old, then it may start to develop some mechanical issues. If the usage of the fan is heavy then these issues may occur even faster. Beyond the wobble there are many other signs indicating that your ceiling fan needs to be replaced:
- The fan will slow down
- The motor makes some buzzing sound
- Even with proper maintenance squeaks may still persist.
If the problems persist, then it is time for the fan to service professionally. But if the fan is much older, then it is better to simply replace it. For more information on How to fix a Wobbly Ceiling Fan and the best ceiling fans, stay tuned to our portal.